Epoxy Resin AB Glue Steel Epoxy Adhesive For Heat Resistant Metal Bonding
Product Details:
- Place of Origin: Hunan, China
- Brand Name: DEYI
- Model Number: DY-E730
Payment & Shipping Terms:
- Packaging Details: 56.7g/pcs; 24pcs/small box; 288pcs/big cartons
- Payment Terms: T/T
- Supply Ability: 500000 Piece/Pieces per Month
30 Minutes Epoxy Resin Adhesive For Black And White Bonding Classification
Description
| Other Names: | Epoxy Resin Ab Glue | MF: | NONE |
|---|---|---|---|
| EINECS No.: | 224-221-9 | Classification: | Other Adhesives |
| Main Raw Material: | Ethyl-cyanoacrylate | Usage: | Construction, Fiber & Garment, Footwear & Leather, Packing, Transportation, Woodworking |
| Type: | General Purpose | Color: | Clear |
| Port: | Shanghai, Ningbo, Shenzhen, Guangzhou, Tianjin, Qingdao | ||
| Highlight: | 30 Minutes epoxy resin adhesive, Clear epoxy resin adhesive, ab epoxy glue | ||
30 Minutes Epoxy Resin Adhesive For Black And White Bonding Classification Other Adhesives 30-MIN EPOXY ADHESIVE is resistant to acid, alkali, and oil. Non-flammable, non-shrinking and waterproof. Makes metallic grey finish. Can be filed, grinded and drilled. Technical Parameters
| Color | Viscosity (CPS/25℃) | Mixture | Work Time(25℃/100g) | Cure Time (25℃/100g) | Lap Shear Strength (St-St) | Heat Resistance (℃) | Shelf Life (25℃) |
| A:black | A:>100000 | 1:1 | 20 Minutes | Touch Dry:30 Mins | ≥16 Mpa | -60 to +100 | 12 months |
| B:milky white | B:>100000 | Full Cure: 24 hrs |
Products Description 
STORAGE&WARNINGSStorage:
* Store the adhesive in shady, dry, well-ventilated, damp-proofing places.
* Store the adhesive at room temperature.
* Keep away from any source of ignition.
Warnings:
* The adhesive is irritable to skin and eyes.
* Keep out of reach of children.
* In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.DERECTIONS* Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
* Remove the cap from the tube and puncture the tubes.
* Mix part A and part B at the ratio of 1:1. Mix thoroughly until a uniform color is achieved. It must be used within 20 minutes.
* Apply a thin coat to both surfaces. Mixture will become warm while it sets. No clamping. Slight pressure is needed while
material sets. If temperature is below 5℃, it will take a longer time to cure.